SCS 3010 Otto Kuennecke
With the SCS 3010, important processing steps for the production of plastic cards will be partially automated. In particular, it supports the simple but absolute precise manual positioning of the foils for the composition of the layers.
The most important tool for the operator to manage this task is a video system with up to 4 cameras. A halogen cold light source creates good visual conditions to view and set the indicators, especially for the first setting, which is usually face-down.
Any kind of layer compositions can be processed, e.g. foils made of different types of plastics and all commonly used formats up to 48 cards - even mixed - by optional application of 4 welding bits.
All processing steps can be carried out by the operator sitting in front of the system. As usual, he can rely on an ergonomically constructed computer operator interface. Job parameters can be saved at any time and be recalled on demand.
• MS Windows® operated system
• Optionally mixed foil formats
• Processing card bodies made of PVC,PC. ABS, PET etc.
• Layers and alignment of different plastics possible
• 3 to 4 positioning pins, hub position can be programmed
• 2 welding bits, optionally 4
• Welding temperature 50 to 450°C
• Welding period up to 32 sec.
• Measured of the thickness of the aligned foils
• 2 video cameras, optionally 4 possible.
• Punch for exact filing holes of the aligned foils
• Computer based control and setup of the system, saving and call-up of all relevant job data
